Freud LU95R010 10-Inch 72 Tooth TCG Solid Surface Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating
by Freud

List Price: $159.30
Our Price: $84.98
You Save: $74.32 (47%)
Availability: Usually ships in 1-2 business days
Category: Tools
See more product details

Product Details

• Micro grain carbide for razor sharp cuts
• Precision ground arbor for accurate cuts
• Triple chip tooth design for chip free cuts
• Laser cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
• Non-stick Perma-SHIELD coating reduces gumming, rusting and corrosion

• This Old House
• Freud LU89M010 10-Inch 72 Tooth TCG Nonferrous Metal Cutting Saw Blade with 5/8-Inch Arbor
• Freud LU84R011 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU91M010 10-Inch 60 Tooth ATB Crosscutting Miter Saw Blade with 5/8-Inch Arbor

Description of Freud LU95R010 10-Inch 72 Tooth TCG Solid Surface Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

LU95R010 Solid Surface Cutting Saw Blade with Perma-SHIELD At a Glance: Ideal for solid surfaces, vinyl, and Plexiglass from 1/4 to 1-5/8 inches thick Heavy-duty plate with laser-cut, anti-vibration slots Tough Perma-SHIELD coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 10" Teeth 72 MTCG Arbor 5/8" Kerf (K) .126 Plate (P) .087

Depth of Cut

Special Side-Grind Tooth Design enables blade to remain cool while cutting, eliminating melting Laser-Cut Anti-Vibration Slots drastically reduce vibration and sideways movement in the cut extending blade life, and giving a crisp, swirl-free flawless finish

Modified Triple-Chip Grind for Clean, Swirl-Free Finishes
Built to leave a crisp, high-quality finish when cutting solid surfaces like DuPont Corian, Wilsonart Gibralter, and SSV Fountainhead, this blade features 72 teeth with a special, modified, triple-chip grind. This configuration leaves swirl-free, burn-free cuts in a broad range of solid-surface materials.

This blade is designed for optimal performance when cutting solid surfaces, vinyl, and Plexiglass that ranges from 1/4 to 1-5/8 inches thick. It also performs well in chipboard, plywood, and laminates. It has a 5/8-inch arbor and produces a 0.126 kerf.

Well-Balanced, Anti-Vibration Design
This Freud blade is precision balanced and pretensioned for truer cuts under heavy loads. It also features laser-cut, anti-vibration slots that reduce chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the entire blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use. Furthermore, this well-balanced, anti-vibration design means there's no need to use add-on stabilizers with this blade.

High-Density Carbide for Maximum Cutting Performance
This solid-surface blade's 72 teeth are finished with tips made from Freud's application-specific TiCo high-density carbide "plastic blend." Formulated to extend tooth life in the face of work with plastics and solid surfaces, this blend is extra hard--due to the proportion of high-density tungsten carbide that goes into it--and it still offers the mix of improved corrosion resistance, heat resistance, and impact resistance that you expect from TiCo.

With teeth that start out sharper and deliver improved edge retention, the blade can go longer between sharpening, and will hold up longer--saving you time and money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LU95R010 Solid Surface Cutting Saw Blade with Perma-SHIELD--10-inch diameter, 5/8-inch arbor, 72-tooth design.

Tools and Hardware Reviews of Freud LU95R010 10-Inch 72 Tooth TCG Solid Surface Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating

Customer Review: As Smooth as Glass
Summary: 5 Stars

Table Saw Blades

• Tools & Home Improvement > Categories > Power Tool Accessories > Blades > Table Saw Blades