Freud LU87R012 12-Inch 30 Tooth ATB Thin Kerf Ripping Saw Blade with 1-Inch Arbor and PermaShield Coating
by Freud

List Price: $72.10
Our Price: $46.71
You Save: $25.39 (35%)
Availability: Usually ships in 2-3 business days
Category: Tools
See more product details

Product Details

• Laser cut bodies for accurate cuts
• Freud micrograin carbide for long life
• Anti-vibration vents for stability
• Perma-shield coating to resist heat
• FREU9

• Freud LU88R012 Industrial Thin Kerf Fine Finish Crosscut Saw Blade 12 inch x 80t ATB 1 inch arbor Perma-Shield Coated
• Freud LU84R012 12-Inch 60 Tooth ATB Combination Saw Blade with 1-Inch Arbor and PermaShield Coating
• Freud LU85R012 12-Inch 96 Tooth ATB Crosscutting Saw Blade with 1-Inch Arbor and PermaShield Coating
• Freud P412 Premier Fusion 12-Inch 48 Tooth Hi-ATB Perma-Shield Coated Saw Blade with 1-Inch Arbor
• Freud F412 Premier 12-Inch 40 Tooth ATB General Purpose Saw Blade with 1-Inch Arbor

Description of Freud LU87R012 12-Inch 30 Tooth ATB Thin Kerf Ripping Saw Blade with 1-Inch Arbor and PermaShield Coating

LU87R012 Thin Kerf Rip Saw Blade At a Glance: Ideal for ripping hard- or softwood that's 3/4 to 2-3/4 inches thick Thick, heavy-duty plate and anti-vibration design Tough Perma-SHIELD coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 12" Teeth 30 ATB Arbor 1" Kerf (K) .098 Plate (P) 071

Depth of Cut

Thin Kerf allows for faster feed rate and reduced waste Positive Hook Angle for fast cutting and easy feeding in ripping applications

Large-Tooth, Thin-Kerf Blade Ideal for Low-Horsepower Saws
This rip saw blade is ideally suited to ripping hard- and softwoods, and it also delivers strong results when crosscutting wood or working with plywood. Ideal for working with ¼¼materials that are 3/4 to 2-3/4 inches thick, the blade can also handle thinner or thicker materials, and it can be used to cut chipboard or laminates. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 1-inch arbor and produces a 0.098 kerf.

In addition to offering faster cuts through tough materials, its large tooth design allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. Plus, the large gullets between these teeth ensure easy chip removal.

Well-Balanced, Anti-Vibration Design
This Freud blade is pretensioned for truer cuts under heavy loads. It also features an anti-vibration design that reduces chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance
This thin-kerf rip saw blade's 30 teeth are finished with tips made from an application-specific TiCo high-density carbide "ripping blend" that offers improved density, hardness, corrosion resistance, and heat resistance.

Ideal for the demands of ripping large quantities of thick, hard wood, this carbide blend includes extra cobalt for increased impact resistance. Plus it delivers increased sharpness and edge retention, which means the blade will hold up longer--saving you money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LU87R012 Thin Kerf Rip Saw Blade--12-inch diameter, 1-inch arbor, 30-tooth design.

Tools and Hardware Reviews of Freud LU87R012 12-Inch 30 Tooth ATB Thin Kerf Ripping Saw Blade with 1-Inch Arbor and PermaShield Coating

Customer Review: rip saw blade
Summary: 4 Stars

Table Saw Blades

• Tools & Home Improvement > Categories > Power Tool Accessories > Blades > Table Saw Blades