Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating
by Freud

List Price: $59.40
Our Price: $39.99
You Save: $19.41 (33%)
Availability: Usually ships in 24 hours
Category: Tools
See more product details

Product Details

• Features Freud's TiCo Hi-Density Carbide with Titanium for long life and a flawless finish
• Thin kerf requires less power and allows for faster feed rate. Ideal for saws under 3 HP.
• Laser cut anti-vibration slots reduces the vibration that resonates in standard blades extending the blade life.
• Tri-Metal Brazing for impact-resistant tips and precision tensioning keep the blades flat and true.
• Non-Stick Perma-Shield coating to resist heat and reduce pitch build-up

• MLCS 9456 Clamping Miter Gauge
• This Old House
• Freud LU89M010 10-Inch 72 Tooth TCG Nonferrous Metal Cutting Saw Blade with 5/8-Inch Arbor
• Freud LU84R011 10-Inch 50-tooth ATB Combination Saw Blade with 5/8-Inch Arbor and PermaShield Coating
• Freud LU91M010 10-Inch 60 Tooth ATB Crosscutting Miter Saw Blade with 5/8-Inch Arbor

Description of Freud LU87R010 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade with 5/8-Inch Arbor and PermaShield Coating

About Freud's Industrial Blades
Freud?s Industrial Series of blades are designed for the serious woodworker. Available in a variety of styles for different applications, LU and LM blades feature thick carbide tips, precision tensioned bodies and other premium features found in every Freud blade. Industrial blades include red Perma-Shield coating or Silver ICE coating to help reduce friction, heat build-up and gumming, which add up to mean longer blade life.

About the 10-Inch 24-Tooth FTG Thin Kerf Ripping Saw Blade
This exceptional Freud blade requires less energy to feed the material into the saw blade, and eases the strain on your power tool. The "fusion" tooth design gives glass smooth side finishes as well as a chip-free top and bottom during both ripping and crosscutting applications; and the Perma-Shield permanent non-stick coating reduces friction, protecting this thin kerf saw blade against corrosion, gumming and pitch build-up. This laser blade made from high-strength steel is built for long life and precision, and it comes pre-tensioned to remain flat through the shocks from cutting and stresses from turning at high speeds. Its anti-vibration reed design eliminates all vibration and produces the cleanest cuts possible, making the use of a stabilizer unnecessary.

Applications
This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. The Perma-Shield coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. The ideal working range is from 3/4 to 2-3/4-inch thick wood, plywood, laminate, or chip board.

Key Technical Specs

• TiCo Hi-Density Carbide with Titanium
• Ideal for saws under 3 horsepower
• Tri-Metal Brazing for impact-resistant tips
• Non-stick Perma-Shield coating

Warranty
This blade is covered by Freud's limited lifetime warranty.

LU87R010 Thin Kerf Rip Saw Blade At a Glance: Ideal for ripping hard- or softwood that's 3/4 to 2-3/4 inches thick Thick, heavy-duty plate and anti-vibration design Tough Perma-SHIELD coating reduces friction and heat buildup Technical Specs: Coating Perma-SHIELD Diameter 10" Teeth 24 FLAT Arbor 5/8" Kerf (K) .94 Plate (P) .71"

Depth of Cut

Thin Kerf allows for faster feed rate and reduced waste Positive Hook Angle for fast cutting and easy feeding in ripping applications

Large-Tooth, Thin-Kerf Blade Ideal for Low-Horsepower Saws
This rip saw blade is ideally suited to ripping hard- and softwoods, and it also delivers strong results when crosscutting wood or working with plywood. Ideal for working with materials that are 3/4 to 2-3/4 inches thick, the blade can also handle thinner or thicker materials, and it can be used to cut chipboard or laminates. However, some loss of surface finish may occur when it is used outside its ideal range. It has a 5/8-inch arbor and produces a 0.094 kerf.

In addition to offering faster cuts through tough materials, its large tooth design allows the blade to be safely sharpened more times, prolonging the life of the blade and saving you money. Plus the large gullets between these teeth ensure easy chip removal.

Well-Balanced, Anti-Vibration Design
This Freud blade is pretensioned for truer cuts under heavy loads. It also features an anti-vibration design that reduces chatter for a cleaner finish, longer blade life, and reduced noise while you work. And because the blade is laser cut from high-strength steel, you can trust that it will stay stable, flat, and true, even after prolonged use.

High-Density Carbide for Maximum Cutting Performance
This thin-kerf rip saw blade's 24 teeth are finished with tips made from an application-specific TiCo high-density carbide "ripping blend" that offers improved density, hardness, corrosion resistance, and heat resistance.

Ideal for the demands of ripping large quantities of thick, hard wood, this carbide blend includes extra cobalt for increased impact resistance. Plus, it delivers increased sharpness and edge retention, which means the blade will hold up longer--saving you money.

Perma-SHIELD Coating Reduces Friction and Heat Buildup
Built to withstand tough use in less-than-ideal conditions, this blade is finished with Freud's red Perma-SHIELD--a non-stick coating that reduces friction and nearly eliminates the heat buildup that excess friction can cause. By providing complete thermal insulation, this coating protects your tools and your work surface. And it resists binding when the blade is used for large-volume cutting applications, which reduces blade warp.

As a lubricating feature, Perma-SHIELD allows the blade to spin freely while reducing stress on the motor and carriage of your saw. In addition, this coating helps prevent debris collection and resin or "pitch" buildup. Since gummy pitch buildup causes extra drag on the motor of your saw, less buildup is another little convenience that translates into longer tool life and longer blade life. It also means less downtime for blade cleaning, so you get jobs done faster.

This industrial saw blade is backed by Freud's limited lifetime warranty.

About Freud: A History of Innovative Manufacturing
An industry leader for more than 50 years, Freud America, Inc. is a manufacturer and marketer of superior carbide cutting tools for the woodworking industry. Freud is one of the few manufacturers of woodworking tools in the world that produces its own MicroGrain Carbide with Titanium, called TiCo, a high-density combination of Titanium and Cobalt.

By producing their own carbide, Freud has the unique ability to formulate each tool for each specific application, thereby maximizing the cutting life and performance of the tool. Freud's full line of high-quality, woodworking tools includes saw blades, router bits, shaper cutters, power tools, and more.

What's in the Box
Freud LU87R010 Thin Kerf Rip Saw Blade--10-inch diameter, 5/8-inch arbor, 24-tooth design.

Miter Saw Blades

• Tools & Home Improvement > Categories > Power Tool Accessories > Blades > Miter Saw Blades